您好,欢迎来到机械CAD网!
客服QQ:20425042

首页 > 冲压模具 >

设计名称
圆筒冲压工艺及模具设计【无凸缘筒形件】【落料拉深复合模】【说明书+CAD】
设计编号
JX6011
设计软件
AutoCAD,Word
包含内容
见右侧图片
说明字数
见下方截图
图纸数量
见右侧图片
推荐指数
较高
价格
价格优惠中
整理日期
2017-11-07
整理人
admin
设计简介
圆筒冲压工艺及模具设计
摘要: 本设计设计的是筒形件的落料拉深复合模,首先根据计算来确定拉深次数,通过查资料计算修边余量、拉深毛坯直径等。通过对冲压力计算来初选压力机,对工件的零件、模具工作部分(如凸凹模、拉深凸模、落料凹模等)和模具的整体设计来确定模架,最后选择中间导柱模架。对压力机和模具校核后来确定压力机。
本次设计的主要内容为:工件的工艺性分析、冲压工艺方案的确定、模具的技术要求和材料选用。主要尺寸计算、工作部分尺寸计算、模具整体设计和主要零部件结构设计、模具装配和模具总装图。
关键词:模具,复合模,压力机,拉深
Cylindrical stamping process and die design
Abstract:  this design is design of cylindrical parts blanking deep drawing composite modulus, first of all, according to the calculation to determine the number of deep drawing, trimming allowance by check information calculation and drawing blank diameter, etc. Primary press through hedge pressure calculation, parts, mould work part of the workpiece (such as intensive, drawing punch, blanking die, etc.) and the integral design of the mould to determine the die set, finally choose the middle column formwork. The press and die check later determined press.
    The main content of this design is: the artifact's manufacturability analysis, the scheme determination of stamping process and die technical requirements and material selection. Main size calculation, working part size calculation, die major parts of the overall design and structure design, mold assembly and mold assembly drawing.
Keywords: die,drawing,compound,die,press
目录
1 绪论 1
1.1.国内模具的现状和发展趋势 1
1.2.国外模具的现状和发展趋势 1
2 零件的工艺性分析 3
2.1.材料分析 3
2.2.结构分析 4
3 工艺方案的确定 5
3.1.确定拉深次数 5
    3.1.1.确定修边余量 5
    3.1.2.计算毛坯直径 5
    3.1.3.确定是否采用压边圈 5
    3.1.4.确定拉深次数 5
3.2.工艺方案的确定 6
    3.3.画出工序件草图 6
4 主要工艺计算 8
    4.1.排样设计 8
    4.2.落料、拉深复合模工艺计算 9
        4.2.1.落料凸、凹模刃口尺寸计算 9
        4.2.2.首次拉深凸、凹模尺寸计算 10
    4.2.3.二次拉深凸、凹模尺寸计算 11
4.3.落料力计算 12
4.4.卸料力和顶件力计算 13
4.5.压边力计算 14
4.6.拉深力计算 15
4.7.压力中心计算 16
4.8.压力机的选择 16
5 落料、拉深复合模具结构设计 18
    5.1.模具工作零件设计 18
5.1.1.落料凸、凹模结构设计 18
5.1.2.凸凹模结构设计 19
5.1.3.拉深凸模设计 19
    5.1.4.凸凹模间隙 20
5.2.定位元件设计 20
5.3.弹性元件设计 21
    5.4.模架选用 22
    5.5.压力机高度校核 22
6 模具整体设计 24
6.1.卸料方式 24
6.2.送料方式 24
6.3.导向装置 24
7 模具装配图 25
结论 26
致谢 27
参考文献 28
部分图纸截图
展开
  • 在线咨询
  • QQ:20425042
  • QQ:99872184
  • 技术支持
  • 售后服务