设计简介
内容摘要：
在生产过程中，使生产对象（原材料，毛坯，零件或总成等）的质和量的状态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该工序的夹具，刀具及量具，还有走刀次数和走刀长度，最后计算该工序的基本时间，辅助时间和工作地服务时间。
关键词：
工序，工位，工步，加工余量，定位方案，夹紧力
Abstract
Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.
Keyword:
The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp strength
目 录
摘要
Abstract
第一章 绪论----------------------------------------------------------------------------------3
第二章 零件的工艺分析-----------------------------------------3
2.1 零件的工艺分析---------------------------------------------- 3
2.2 确定毛坯的制造形式------------------------------------------- 3
2.3 齿圈零件的工艺性---------------------------------------------3
第三章 拟定齿圈加工的工艺路线--------------------------------4
3.1 定位基准的选择-----------------------------------------------4
3.2 加工路线的拟定-----------------------------------------------5
第四章 加工余量，工序尺寸及毛坯尺寸的确定------------------7
4.1 确定毛坯----------------------------------------------------------------------------------7
4.2 机体----------------------------------------------------------------------------------------8
4.3 齿圈----------------------------------------------------------------------------------------8
第五章 确定切削用量及基本工时-------------------------------------------------9
5.1 机座----------------------------------------------------------------------------------------9
5.2 机体---------------------------------------------------------------------------------------18
第五章 夹具设计 -----------------------------------------------------------------------34
6.1 研究原始资料--------------------------------------------------27
6.2 定位装置的设计------------------------------------------------------------------------27
6.3 夹紧装置的设计------------------------------------------------------------------------29
6.4 夹具体的设计---------------------------------------------------------------------------33
参考文献 ----------------------------------------------------------------------------------------35
结论 -------------------------------------------------------------------------------------- 36
在生产过程中，使生产对象（原材料，毛坯，零件或总成等）的质和量的状态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该工序的夹具，刀具及量具，还有走刀次数和走刀长度，最后计算该工序的基本时间，辅助时间和工作地服务时间。
关键词：
工序，工位，工步，加工余量，定位方案，夹紧力
Abstract
Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.
Keyword:
The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp strength
目 录
摘要
Abstract
第一章 绪论----------------------------------------------------------------------------------3
第二章 零件的工艺分析-----------------------------------------3
2.1 零件的工艺分析---------------------------------------------- 3
2.2 确定毛坯的制造形式------------------------------------------- 3
2.3 齿圈零件的工艺性---------------------------------------------3
第三章 拟定齿圈加工的工艺路线--------------------------------4
3.1 定位基准的选择-----------------------------------------------4
3.2 加工路线的拟定-----------------------------------------------5
第四章 加工余量，工序尺寸及毛坯尺寸的确定------------------7
4.1 确定毛坯----------------------------------------------------------------------------------7
4.2 机体----------------------------------------------------------------------------------------8
4.3 齿圈----------------------------------------------------------------------------------------8
第五章 确定切削用量及基本工时-------------------------------------------------9
5.1 机座----------------------------------------------------------------------------------------9
5.2 机体---------------------------------------------------------------------------------------18
第五章 夹具设计 -----------------------------------------------------------------------34
6.1 研究原始资料--------------------------------------------------27
6.2 定位装置的设计------------------------------------------------------------------------27
6.3 夹紧装置的设计------------------------------------------------------------------------29
6.4 夹具体的设计---------------------------------------------------------------------------33
参考文献 ----------------------------------------------------------------------------------------35
结论 -------------------------------------------------------------------------------------- 36
