设计简介
摘 要
随着汽车工业的迅速发展,汽车维修工业也迅速壮大。特别是改革开放以来,我国的汽车维修行业有了很大的发展，为之服务的汽车维修设备行业已成为我国的新兴行业并不断发展壮大。作为汽车维修用必备之一的各种汽车举升机设备如雨后春笋般的涌现。但符合国际标准的不多,中高档层次的举升机没有。
本设计结合汽车技术的发展要求及汽车维修作业的实际需要,设计符合国际标准的、液压驱动及可四轮定位的四柱式汽车举升机。四柱式举升机有四根立柱、两根横梁、用于支撑汽车的两个台板。本设计只采用一个液压缸,其他立柱通过钢丝绳连接以实现同步举升。举升前,汽车很容易正确无误的驶上四柱举升机的台板。其具有承载稳定、支承载荷受力简单、应力较低等优点,具有较高的使用价值。
对于汽车维修企业来说，汽车举升机可能是除厂房外的最重要的投资,因为它具有至关重要和不可替代的作用，甚至直接影响到汽车维修业务的兴衰。汽车举升机是汽车维修设备行业的支柱设备之一,让我们生产出更多、更好、更受用户欢迎的汽车举升机,为汽车维修企业服务。
关键词: 四轮定位;四柱式;液压驱动;同步举升
ABSTRACT
Along with automobile industry rapid development, the automobile service industry also rapidly expands. Since the special reform and open policy, our country’s automobile service industry has had a great development, the vehicle maintenance equipment industry has become an emerging industry in China and will continue to grow and develop. As one of the essential maintenance equipment, each kind of automobile lift likes the emergence of the mushrooming. But little of them can conform to the international standard.
This design combine with automobile technology development request and automobile service work actual needs, designed in line with international standards, four-wheel hydraulic drive, and the positioning of the frame of vehicle lift. Four-post lift has four posts, two beams and two plates. This design only consists of a hydraulic cylinder, other columns realize synchronization through the cable. Before lifting, the automobile is very easy to be correctly driven onto the plate of the lift. It has the load bearing stably, the supporting load stress simple, the stress is lower and so on the merit, which has the higher use value.
For the vehicle maintenance enterprises, the vehicle lift is the most important investment in addition to plants outside, because it has the function which very important and cannot be substituted, even directly affects prosperity and decline of the automobile service. The automobile lift is one of important equipment in automobile maintenance, Let us produce more, better and more popular with users of the automobile lifts for vehicle maintenance service.
Key words: four-wheel positioning，four-post，hydraulic actuate，synchronous raise
目 录
摘 要 III
Abstract IV
目录 V
1 绪论 1
1.1国外的情况和发展趋势 1
1.2国内的情况和发展趋势 4
1.3设计的依据及意义 4
1.4轿车举升机的分类 5
2课题分析 7
2.1设计技术要求 7
2.2设计特点 7
2.2.1举升机台板降到下位时，与地面应尽可能在同一平面上 7
2.2.2 正确选择传动方式 7
2.2.3 钢丝绳的选择 7
2.2.4 汽车举升机的安全保证措施 7
3方案论证 8
3.1纯机械结构 8
3.2液压结构 8
4 机械部件设计计算 10
4.1 举升机运动过程原理 10
4.2 立柱设计计算 11
4.3 梁设计计算 14
4.3.1 强度校核 16
4.3.2 刚度校核 18
4.4 桥身设计计算 18
4.4.1 强度校核 19
4.4.2 刚度校核 21
4.5 钢丝绳的选取 21
4.6钢丝绳与吊环的联结方法 21
4.7滑轮轴承的选用及校核 22
5 液压系统设计计算 24
5.1液压系统设计计算 24
5.2液压系统工作原理 25
6 电气控制原理 26
7 安全装置 27
8 结论 28
9 致谢 29
参考文献 31
随着汽车工业的迅速发展,汽车维修工业也迅速壮大。特别是改革开放以来,我国的汽车维修行业有了很大的发展，为之服务的汽车维修设备行业已成为我国的新兴行业并不断发展壮大。作为汽车维修用必备之一的各种汽车举升机设备如雨后春笋般的涌现。但符合国际标准的不多,中高档层次的举升机没有。
本设计结合汽车技术的发展要求及汽车维修作业的实际需要,设计符合国际标准的、液压驱动及可四轮定位的四柱式汽车举升机。四柱式举升机有四根立柱、两根横梁、用于支撑汽车的两个台板。本设计只采用一个液压缸,其他立柱通过钢丝绳连接以实现同步举升。举升前,汽车很容易正确无误的驶上四柱举升机的台板。其具有承载稳定、支承载荷受力简单、应力较低等优点,具有较高的使用价值。
对于汽车维修企业来说，汽车举升机可能是除厂房外的最重要的投资,因为它具有至关重要和不可替代的作用，甚至直接影响到汽车维修业务的兴衰。汽车举升机是汽车维修设备行业的支柱设备之一,让我们生产出更多、更好、更受用户欢迎的汽车举升机,为汽车维修企业服务。
关键词: 四轮定位;四柱式;液压驱动;同步举升
ABSTRACT
Along with automobile industry rapid development, the automobile service industry also rapidly expands. Since the special reform and open policy, our country’s automobile service industry has had a great development, the vehicle maintenance equipment industry has become an emerging industry in China and will continue to grow and develop. As one of the essential maintenance equipment, each kind of automobile lift likes the emergence of the mushrooming. But little of them can conform to the international standard.
This design combine with automobile technology development request and automobile service work actual needs, designed in line with international standards, four-wheel hydraulic drive, and the positioning of the frame of vehicle lift. Four-post lift has four posts, two beams and two plates. This design only consists of a hydraulic cylinder, other columns realize synchronization through the cable. Before lifting, the automobile is very easy to be correctly driven onto the plate of the lift. It has the load bearing stably, the supporting load stress simple, the stress is lower and so on the merit, which has the higher use value.
For the vehicle maintenance enterprises, the vehicle lift is the most important investment in addition to plants outside, because it has the function which very important and cannot be substituted, even directly affects prosperity and decline of the automobile service. The automobile lift is one of important equipment in automobile maintenance, Let us produce more, better and more popular with users of the automobile lifts for vehicle maintenance service.
Key words: four-wheel positioning，four-post，hydraulic actuate，synchronous raise
目 录
摘 要 III
Abstract IV
目录 V
1 绪论 1
1.1国外的情况和发展趋势 1
1.2国内的情况和发展趋势 4
1.3设计的依据及意义 4
1.4轿车举升机的分类 5
2课题分析 7
2.1设计技术要求 7
2.2设计特点 7
2.2.1举升机台板降到下位时，与地面应尽可能在同一平面上 7
2.2.2 正确选择传动方式 7
2.2.3 钢丝绳的选择 7
2.2.4 汽车举升机的安全保证措施 7
3方案论证 8
3.1纯机械结构 8
3.2液压结构 8
4 机械部件设计计算 10
4.1 举升机运动过程原理 10
4.2 立柱设计计算 11
4.3 梁设计计算 14
4.3.1 强度校核 16
4.3.2 刚度校核 18
4.4 桥身设计计算 18
4.4.1 强度校核 19
4.4.2 刚度校核 21
4.5 钢丝绳的选取 21
4.6钢丝绳与吊环的联结方法 21
4.7滑轮轴承的选用及校核 22
5 液压系统设计计算 24
5.1液压系统设计计算 24
5.2液压系统工作原理 25
6 电气控制原理 26
7 安全装置 27
8 结论 28
9 致谢 29
参考文献 31
