设计简介
摘 要
本文主要研究了内齿套的作用以及工艺编制及编程。首先分析了内齿套零件的工艺，并确定制造工艺，然后对内齿套零件进行工艺设计，再确定加工余量与毛坯尺寸，毛坯图的设计进行工序设计，最终进行编程。
内齿套零件的加工是通过普通机床和数控机床进行加工的，数控技术是现在的机床的发展趋势，降低了人们的劳动程度，提高了工作效率，现在各国都非常注重数控技术的应用，并不断发展，以取得更高的劳动效率。
关键词：内齿套，编程，毛坯尺寸，工序，数控机床
Abstract
With development of all kind of science technology and global economy, manipulator is a automated 16 devices that can mimic the human hand and arm movements to do something，aslo can according to a fixed procedure to moving objects or control tools. It can replace the heay labor in order to achieve the production mechanization and automation, and can work in dangerous working environments to protect the personal safety.
Therefore widely used in machine building, metallurgy, electronics, light industry and atomic energy sectors.The pneumatic part of the design is primarily to choose the right valves and design a reasonable pneumatic control loop, by controlling and regulating pressure, flow atcompress engt F hthdirec tionpro cedurework.
Keywords：pneumatic manipulator ,cylinder ,loop ,Fout degrees, of freedom
摘 要 2
1绪论 4
2加工和数控工艺知识 8
2.1 内齿套零件分析 9
2.2 刀具、量具的选择 10
2.3 确定毛坯的制作方式 11
2.4 编制加工工艺 14
2.5 工艺规程的设计 15
2.6 确定切削和基本工时量 16
2.6.1粗车 17
2.6.2精车 18
2.6.3平磨左端面 19
2.6.4磨外圆 20
2.6.5磨内孔 21
2.6.6插齿 22
3工件的手动编程 22
3.1 数控编程的定义及分类 22
3.1.1数控编程的定义 23
3.1.2数控编程的分类 23
3.1.3编程方法的选择 23
3.2 编程原点的确定 24
3.3 零件造型及加工 24
3.4 主要加工工序程序清单 25
致 谢 26
参考文献 27
总 结 28
本文主要研究了内齿套的作用以及工艺编制及编程。首先分析了内齿套零件的工艺，并确定制造工艺，然后对内齿套零件进行工艺设计，再确定加工余量与毛坯尺寸，毛坯图的设计进行工序设计，最终进行编程。
内齿套零件的加工是通过普通机床和数控机床进行加工的，数控技术是现在的机床的发展趋势，降低了人们的劳动程度，提高了工作效率，现在各国都非常注重数控技术的应用，并不断发展，以取得更高的劳动效率。
关键词：内齿套，编程，毛坯尺寸，工序，数控机床
Abstract
With development of all kind of science technology and global economy, manipulator is a automated 16 devices that can mimic the human hand and arm movements to do something，aslo can according to a fixed procedure to moving objects or control tools. It can replace the heay labor in order to achieve the production mechanization and automation, and can work in dangerous working environments to protect the personal safety.
Therefore widely used in machine building, metallurgy, electronics, light industry and atomic energy sectors.The pneumatic part of the design is primarily to choose the right valves and design a reasonable pneumatic control loop, by controlling and regulating pressure, flow atcompress engt F hthdirec tionpro cedurework.
Keywords：pneumatic manipulator ,cylinder ,loop ,Fout degrees, of freedom
目 录
摘 要 2
1绪论 4
2加工和数控工艺知识 8
2.1 内齿套零件分析 9
2.2 刀具、量具的选择 10
2.3 确定毛坯的制作方式 11
2.4 编制加工工艺 14
2.5 工艺规程的设计 15
2.6 确定切削和基本工时量 16
2.6.1粗车 17
2.6.2精车 18
2.6.3平磨左端面 19
2.6.4磨外圆 20
2.6.5磨内孔 21
2.6.6插齿 22
3工件的手动编程 22
3.1 数控编程的定义及分类 22
3.1.1数控编程的定义 23
3.1.2数控编程的分类 23
3.1.3编程方法的选择 23
3.2 编程原点的确定 24
3.3 零件造型及加工 24
3.4 主要加工工序程序清单 25
致 谢 26
参考文献 27
总 结 28
